Hearts of Iron 4 meta - combat width, division templates, and more (2024)

So, you want to know about the new Hearts of Iron 4 meta? With the release of Hearts of Iron IV’s No Step Back expansion, the WW2 strategy game has changed in several significant ways, and we’re not just talking about HOI4 supply. One of the stated goals of the free 1.11 patch that accompanied it is to shake up the grand strategy game’s previous – stale – meta of specific division templates and combat widths.

It’s safe to say that things have changed, that’s for sure. Whether this new meta will get as stale as the old one remains to be seen, but early indications suggest that there are more viable options now, especially with the new supply system making larger divisions lessuseable than they used to be.

If you’re a veteran looking for the topline on what’s new, or a new player trying to understand the conversation and whatever the hell a 40/20 is, we hope this guide will help you get up to speed on the Hearts on Iron IV No Step Back meta.

Hearts of Iron 4 meta – No Step Back

Below we shall explore two key concepts associated with the current Hearts of Iron 4 meta – combat width and division templates, as well as some sections dealing with specific queries such as the new floating harbours. We shall expand this guide with new queries and information as time goes on.

Hearts of Iron 4 combat width

The ‘combat width’ of a division is determined by how many battalions a division has, and what type they are. It’s a stat that acts as an expression of physical size, and represents how much ‘room’ the division will take up when fighting on the frontline.

Provinces in Hearts of Iron 4 also have a ‘size’ that represents the maximum amount of combat width that can be present at any one time per side. So if two opponents are fighting over a province, they each get a separate allotment of combat width as dictated by the province.

Related:Hearts of Iron 4 cheats

If the total combat width of divisions fighting on the frontline exceeds the maximum cap of a province, then divisions will be placed in ‘reserve’ until the number is brought under the cap. These reserve divisions then join the fray under a separate set of rules.

As of the 1.11 patch, province width is as follows:

  • Forest province width is 84, with a reinforce width of 42
  • Jungle province width is 84, with a reinforce width of 42
  • Marsh province width is 78, with a reinforce width of 26
  • Urban provinces width is 96, with a reinforce width of 32
  • Mountain provinces width is 75, with a reinforce width of 25
  • Desert provinces width is 90, with a reinforce width of 45
  • Plains provinces width is 90, with a reinforce width of 45

The ‘reinforcement width’ mentioned refers to a situation where the attacker is attacking a province from more than one location. When this happens, the combat width of the province the battle is taking place in is increased per additional avenue of attack beyond the first one.

As an example: If an attacker is advancing on a defended Forest province from three separate provinces. The combat width will be 84 + 42 + 42, for a total of 168, which both sides get to fill up as separate allowances. Certain techs, doctrines etc. can reduce the base combat width of various battalions. For example, the ‘Mass Assault’ doctrine tree has options that reduce the combat width of infantry battalions from 2 width to 1.6 width.

Hearts of Iron 4 division templates

Hearts of Iron 4’s smallest independent combat unit for land warfare is the division, however the game offers a template designer that lets you choose what battalions it comprises. This will determine its overall stats, such as combat width, but also health, organisation, hard and soft attack, and so on.

Division templates are often talked about in the context of the Hearts of Iron 4 meta, which determines what the ‘optimum’ division template looks like. You can of course create any kind of template you have the resources to field. The old meta used to dictate that divisions of combat widths 20 or 40 were the best, because of the old province sizes.

With the province size changes, there’s currently less certainty over what kind of width is now ‘optimum’, but numbers such as 24, have been thrown about, with 12 at the lower end and 36 at the high end, mainly because they’re the most divisible numbers. This is still being explored, however, so watch this space.

Beyond that, there are also some thoughts around the optimum composition of a division template as well. For example, the old 20-width meta for infantry divisions typically extended to suggesting that you have seven line infantry, and then two line artillery, for the best mix of stats (with some default support company options as well).

Related:Hearts of Iron 4 DLC guide

With the overall combat width meta in flux, the optimum template is also a bit up in the air as well, but generally speaking the current consensus seems to be to use a similar mix of line battalions for infantry. Tank and motorised divisions operate under separate schools of thought.

For a rough idea of what an ‘optimum’ division template used to look like, you can check out this incredibly thorough guide on Steam. It’s not been updated for No Step Back, but you can look at some of the division templates it suggests for a rough idea of where to start.

Hearts of Iron 4 floating harbor

The No Step Back expansion introduced a new premium feature called a Floating Harbour, otherwise known as ‘Mulberry’ harbours. These are artificial docks that were most famously deployed after the D-Day landings off the coast of Normandy, to make it easier for ships to offload supplies without a dedicated port.

In Hearts of Iron 4, these function largely the same – they are a temporary structure that is placed after a successful naval invasion which will act like a port, allowing your nation’s supply network to feed supplies to the the province like it would do via a regular port, saving you the need to capture one specifically if you don’t want to.

Related:The best Hearts of Iron 4 mods

Floating Harbors are unlocked with the Landing Craft naval technology in the 1940 slot. This then unlocks a second variant of the naval invasion army plan, which uses the new harbours. Make sure you select that option instead of the vanilla option, and once your invasion force has successfully landed a model should appear in the adjacent sea zone.

Please note, the floating harbours are temporary and will eventually expire.

Hearts of Iron 4 Air Supply

Air supply in Hearts of Iron IV refers to the ‘Air Supply’ mission that can be assigned to Transport Planes, provided youown the Waking the Tiger expansion. Each Transport Plane that isn’t intercepted and shot down will deliver a small amount of supply to the selected province(s), which can be used by any divisions within that province.

It’s an incredibly powerful feature, especially with the new supply system, and enough transport planes can keep a sizeable amount of troops stocked. This makes them especially useful for supporting paradrop operations, and keeping encircled divisions from getting destroyed, as they would otherwise be suffering severe ‘out of supply’ penalities.

Related:The best WW2 games

Please note that the1.11.4 patchhasnerfed Transport Planes by reducing their supply carrying capacity by around 80%, as well as increasing the fuel costs of supply missions, so they won’t be as viable as they used to be at the kind of scales prior to this update.

Hearts of Iron 4 meta - combat width, division templates, and more (2024)


What is the best combat width division in hoi4? ›

Fans of Hearts of Iron 4 who want to find an adequate Combat Width to accommodate most combat situations should consider Combat Width 15. This isn't to say that Combat Width 15 can take down most enemies, but this Width has the advantage of having the least penalties for terrain types and attack directions.

What is the combat width of units in hoi4? ›

The combat width of a division is the total width of its battalions. Most battalions have a combat width of two, artillery (including motorized and self-propelled) guns have a combat width of three. Anti-tank and anti-air battalions (including motorized) have a combat width of one.

Is 21 combat width good? ›

As far as general purpose divisions go, 21 width is perfectly serviceable yeah. Tanks people usually make them 42 w because they fit well in both hills and plains which is where people will mostly attack and where tanks take less penalties.

How to make strong divisions in HOI4? ›

To maximize combat division effectiveness width should be divisible by 80 at either 40, 20, or 10. Infantry and Armor battalions are 2 width, artillery is 3 width, and support doesn't add to width (line anti-air and line anti-tank is 1 width). In the game 40 width divisions are the best for front line combat.

What country should I play first in HOI4? ›

New players may want to seriously consider one of the historically neutral countries of WW2 (with Historical AI turned on). With this in mind, Sweden represents a solid choice. Out of all the Scandinavian countries, Sweden is the most powerful.

Is Hearts of Iron 4 complicated? ›

IGN wrote a positive review, describing it as "an incredibly complex World War II simulation that will require potentially hundreds of hours to master, both in-game and poring over wiki articles that read like an economics textbook", but adding that "the payoff is brilliant for those willing to put in the time to learn ...

What is the 24 division limit in hoi4? ›

Divisions form an army together which may be led by a commander. Each commander can effectively deal with 24 (72 when using an Area Defense Order, 30 with Skilled Staffer Divisions. Five armies can be led by a Field Marshal.

How many divisions are good in hoi4? ›

Thus, as a general rule, 20-width divisions are better at defense, and 40-width are better at attack. Composition will make or break this, of course, but having a breakthrough army of large divisions and several of standard-size for holding the actual line is a solid general rule.

What is the perfect combat width? ›

The best combat widths for non-specialized divisions are 14/15 and 18, if you want to go for larger divisions use 24/25 or 35/36. In general, larger divisions take more penalties, however the penalties are only in the low single digits.

Can you delete divisions in hoi4? ›

Click the Unassign Units button or press the X key X to remove the selected divisions from the army. Note that this action preserves the divisions for reassignment to a new or different army.

How far can you play in hoi4? ›

You can play as long as you like, and I've seen people go on runs until like 1980, but it gets very content-barren once focus trees start to run out of content. Mods tend to be much longer (Road to 56 goes until 1956ish for example). Well you can build strategic jet bombers so I'd say the tech runs out around 1952.

What is combat width Europa Universalis 4? ›

The base combat width is 15. As military technology advances, a country's combat width increases, allowing them to use more soldiers effectively at once. All countries other than Native Americans start with tech level 2 or 3, so their starting combat width will be 20.

Top Articles
Latest Posts
Article information

Author: Rubie Ullrich

Last Updated:

Views: 5649

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Rubie Ullrich

Birthday: 1998-02-02

Address: 743 Stoltenberg Center, Genovevaville, NJ 59925-3119

Phone: +2202978377583

Job: Administration Engineer

Hobby: Surfing, Sailing, Listening to music, Web surfing, Kitesurfing, Geocaching, Backpacking

Introduction: My name is Rubie Ullrich, I am a enthusiastic, perfect, tender, vivacious, talented, famous, delightful person who loves writing and wants to share my knowledge and understanding with you.